Blackberry5xxx, 6xxx, 7xxx Series (except for BB 7100 and 7130)
Blackberry 7100, 7130
Blackberry 8100 Pearl
alternative instructions for some Vodafone Blackberry 8100
Blackberry Curve, 8800, 8300
Blackberry 8700, 8700c, 8707
Blackberry 8230 Curve
Blackberry 9000, 9500, 9530 Storm
Sidekick / HiptopAll models
Sierra wireless aircardWindows XP and 2000 via Communication Manager
Windows XP and 2000 via HyperTerminal
Use these instructions if the Communication Manager software is not installed on the computer or if the Communication Manager instructions did not work the first time.
Option Data CardsWindows XP and 2000 via HyperTerminal
If you received two unlock codes the first one is Unfreeze code. The second code is Network Unlock Code (NCK). If you received only one code from us it's a Network Unlock Code (NCK).
How to remove Phone freeze
A frequent reason for Freeze Code to be enabled is when user enters several erroneous NCK codes.
If your cell phone shows a "Phone Freeze" message use the first code to unfreeze it. Enter the 8-digit code with SIM card in the phone when the "Phone Freeze" message is displayed, then press OK button (middle buttom, depending on phone branding can be called differently).
You will not see text appear on screen while typing.
You can now proceede to entering Network Unlock Code.
How to enter Network Unlock Code
Samsung Z510, Z650, Z320i
Samsung Z105 and Z107
Samsung 3G series, D, Z-series, some A-, C-, E-, T-, X-series, other models
Other Samsung models
No need to hold other keys while entering code
If you are unable to connect to the service provider or unable to make out-going calls or receive messages, this has nothing to do with your phone being locked. You need to force the Blackjack to change to GSM mode:
iPAQ 6320, 6325, 6510, 6515
Treo 650, 680
Model : LG GW520
If one of the followings messages appear
"Contact Service Provider"
"Wait before enter special Code"
Power on the phone and leave it for 40 minitues to 5 hours until you see the message "Enter Special Code"
Motorola CDMA & TDMA
If phone is asking for NETWORK PUK
Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password.
If phone is asking for SERVICE PROVIDER PUK
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you
Other NEC models
Older NEC models
All Nokia Models
HTC, Pocket PC, XDA, Qtek, Dopod, i-Mate, XDA, etc